Alpha Hot Water – Error Code 6

Alpha Hot Water System – Error Code 6

Is your Alpha hot water system showing up with Error Code 6 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code 6 and whether you should keep using your Alpha hot water system.

What is a Alpha Error Code 6?

The Alpha Hot Water System has an Error Code 6, which means that: Error Code 6 on the Alpha Water Heater indicates a problem with the domestic hot water (DHW) sensor. This sensor is responsible for measuring the temperature of the hot water in your home. The error could be caused by issues with the wiring of the sensor or a malfunction in the sensor itself.

To fix this error, you may need to check the wiring connections of the DHW sensor and ensure they are properly connected. If the wiring seems fine, the sensor itself might be faulty and need to be replaced. It is important to address this error promptly to ensure your water heater functions correctly and provides you with hot water when needed.

Recommended solution/fix steps

To fix Alpha Water Heater Error Code 6, follow these steps:

1. Turn off the power supply to the water heater.
2. Locate the DHW sensor, usually located near the hot water outlet.
3. Inspect the wiring connected to the sensor for any visible damage or loose connections.
4. If the wiring appears damaged, replace it with new wiring.
5. If the wiring is intact, remove the sensor from its housing.
6. Clean the sensor using a soft cloth or brush to remove any debris or buildup.
7. Reinstall the sensor securely into its housing.
8. Turn on the power supply to the water heater and check if the error code persists.
9. If the error code remains, consider replacing the DHW sensor with a new one.
10. If the issue persists, it may be best to contact a professional plumber or the manufacturer for further assistance

How to reset my Alpha Hot Water System

To reset the Alpha Water Heater with Error Code 6, follow these steps:

1. Turn off the power supply to the water heater by switching off the circuit breaker or unplugging it.
2. Locate the DHW sensor, which is responsible for measuring the temperature of the domestic hot water.
3. Check the wiring connections of the DHW sensor to ensure they are secure and not damaged.
4. If the wiring appears fine, remove the DHW sensor from the water heater.
5. Inspect the sensor for any signs of damage or corrosion.
6. If the sensor is damaged, replace it with a new one.
7. Reconnect the new or existing sensor securely to the water heater.
8. Restore power to the water heater by turning on the circuit breaker or plugging it back in.
9. The water heater should now reset, and the Error Code 6 should be cleared.
10. Monitor the water heater to ensure it is functioning properly and providing hot water

Can I still use my Alpha hot water system?

The Alpha Water Heater with Error Code 6 indicating a domestic hot water (DHW) sensor fault may still be used after addressing the issue. The fault code suggests potential problems with the DHW sensor’s wiring or the sensor itself. To determine if the appliance can still be used, it is necessary to inspect and troubleshoot the DHW sensor and its wiring. If the fault lies in the wiring, it can be repaired or replaced. Similarly, if the sensor is faulty, it can be replaced. Once the issue is resolved, the water heater should be able to function properly and provide domestic hot water as intended