Baxi Boiler – Error Code E20
Is your Baxi boiler showing up with Error Code E20 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code E20 and whether you should keep using your Baxi boiler.
What is a Baxi Error Code E20?
The Baxi Boiler Error Code E20 means that there is a problem with the central heating thermistor sensor. This sensor is responsible for measuring the temperature of the water in the boiler and sending that information to the control panel. If the sensor is faulty, it can cause the boiler to shut down or not work properly.
To fix this error, a qualified technician will need to replace the faulty sensor. It is important to address this issue as soon as possible to prevent further damage to the boiler and ensure that your home stays warm and comfortable. If you see the E20 error code on your Baxi Boiler, it is best to contact a professional for assistance.
Recommended solution/fix steps
When you see the E20 error code on your Baxi Boiler, it indicates a central heating thermistor sensor fault. To resolve this issue, follow these steps:
1. Turn off the boiler and allow it to cool down completely.
2. Check the wiring connections of the thermistor sensor. Ensure they are secure and not damaged.
3. If the wiring is intact, remove the thermistor sensor and clean it using a soft cloth.
4. Reinstall the thermistor sensor and ensure it is properly seated.
5. Turn on the boiler and observe if the error code persists.
6. If the error code continues to appear, it is recommended to contact a qualified technician or the Baxi customer support for further assistance.
Remember, attempting any repairs or troubleshooting beyond your capabilities may void the warranty or cause further damage.
Related Fault Codes
Fault codes that are often associated with or mistaken for error code E20 are: E2O, E2O, E2O, E2O, E2O, E2O, E2O, E2O, E2O, E2O
Can I still use my Baxi boiler?
After seeing Error Code E20 on a Baxi Boiler, which indicates a Central Heating Thermistor Sensor Fault, the machine may still be operable. However, it is important to address the issue promptly to prevent further damage or potential safety hazards. The Central Heating Thermistor Sensor is responsible for monitoring the temperature of the central heating system, and a fault in this component could lead to inaccurate temperature readings or a complete shutdown of the system. It is recommended to consult the manufacturer’s manual or contact a professional technician to diagnose and resolve the issue. Ignoring the error code and continuing to operate the machine without addressing the problem may result in inefficient heating or even a complete breakdown of the system.
