Haier Washer – Error Code Unb

Haier – Error Code Unb

Is your Haier washing machine displaying the error code Unb on the screen?

What is a Haier Error Code Unb?

The “Unb” error code on your Haier washing machine indicates an imbalance in the laundry load. This usually happens when the clothes inside the machine are not evenly distributed, causing the washer to struggle during the spin cycle. This imbalance can prevent the machine from spinning properly, leading to an incomplete wash cycle.

Recommended solution/fix steps

To fix this issue, follow these steps:

1. Turn Off the Machine: First, switch off your washing machine to reset the system.
2. Rearrange the Load: Open the washer and evenly distribute the laundry inside the drum. If the load is too heavy or too light, it can cause imbalance. Try to balance the load by either removing or adding a few items.
3. Check for Trapped Items: Sometimes small items might get trapped in the drum, causing imbalance. Ensure there are no small items stuck.
4. Adjust the Feet: If your washing machine is not level, it can cause balance issues. Adjust the feet of your washer to make sure it’s perfectly level.
5. Restart the Wash Cycle: Close the door and restart the wash cycle to see if the error clears.
6. Consult the Manual: If the error persists, refer to your washing machine’s manual for specific troubleshooting tips or contact Haier customer support for assistance.

Following these steps should help resolve the “Unb” error and allow your washing machine to operate normally.

Haier Troubleshooting to try

• Check the power to your house
• Check your washer circuit breaker
• If your washer motor has overheated, it will work again when it gets back to a normal operating temperature. Try unplugging your machine, waiting fifteen minutes then trying again
• Is the washer door/lid fully closed? If the door/lid isn’t pushing on the closed switch, the machine won’t work
• Have you accidentally started a delayed start timer? Follow the reset directions to reset your machine and cancel the timer
• Is your machine full of suds? You might have used too much detergent and the machine is unable to drain
• Is the drain hose kinked or clogged?
• Are the water taps still turned on?
• Check for a clogged filter

How to restart/reset/reboot your Haier washer?

Looking to reset your Haier washer to clear it and see if that helps get your machine started again? There really isn’t a way to reset the washing machine. What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a reset of the washer. A power cycle can, in rare instances, resolve your issue all by itself. Most of the time it won’t, though, and you’ll need to troubleshoot the issue you’re having in order to resolve it.

Typically, this procedure will be:

1. Unplug your washer
2. Wait 5 minutes
3. Plug in your washer
4. Did this work? If not, try to press/hold the power/start button for ten seconds or press/hold the play/pause button for ten seconds

How to clean your Haier washer filter

Every time you switch on your Washing Machine and run a complete cycle, the clothes get twisted and knocked around, but in the end, they come out cleaner and brighter than before there washing machine disposes of a chunk of the dirt through the drainpipe. Still, the dirt, the residue from the clothes, and soap scum tend to accumulate in the machine over a period of time, which means that your machine needs serious cleaning.

If left uncleaned for long, the accumulated residue can cause several problems like a clogged drainpipe, foul smell on the clothes, etc. Knowing how to clean your washing machine correctly is vital to keep the odours, dirt, and grime at bay. This blog discusses a detailed three-step process to clean your washing machine.

Step 1 – Run a full cycle with vinegar

A common kitchen ingredient, white vinegar has natural disinfectant properties, making it highly useful for cleaning your washing machine. Instead of detergent, pour two cups of white vinegar into the detergent dispenser and run an empty, hot cycle.

Don’t worry about the vinegar harming your machine or the clothes. Hot water and vinegar are a potent combination that effectively removes the accumulated dirt and prevents bacterial growth inside the drum and around the lid. Vinegar also acts as a deodorizer that helps eliminate the odour from the machine.

Step 2 – Spray white vinegar over the drum

Once a cycle is complete, you can prepare a DIY (Do It Yourself) cleaning solution that you can spray over the washing drum. To prepare the solution:

1. Pour one cup of white vinegar into a spray bottle and add a few drops of lemon juice.
2. Mix the solution well and spray it all over the drum.
3. Let the solution sit for a few minutes, and then wipe it off with a soft cloth, preferably a microfiber cloth or a sponge.

While the vinegar will help remove the residual build-up, grease, and water stains on the surface of the drum, lemon will eliminate the foul smell and keep the inside smelling fresh.

Step 3 – Run a second cycle

Run a second empty cycle with hot only water. You may add half a cup of baking soda into the drum to clear the residue from the first cycle. After the second cycle is complete, use a microfibre cloth to wipe out the interior.

Other tips for cleaning your Washing Machine

Front-load machine

The three-step cleaning process discussed above is primarily focused on cleaning the washing drum, which is the most critical section. However, you must also focus on other parts for more comprehensive cleaning, like the gasket or the rubber seal around the door and the detergent tray.

During the wash, detergent residue tends to get stuck around the gasket, and over time it increases the risk of developing mildew and mould. Hence, you must pay close attention to cleaning these areas, using the below tips:

1. Spray white vinegar on the rubber seal and in the detergent tray.
2. Keep the door and the tray open for a few minutes
3. Wipe the gasket and the tray with a microfibre cloth or sponge.

Moreover, leave the door open for at least 20-30 minutes after every wash to let the inside of the machine dry out entirely and prevent moisture build-up.

Top load machine

Top-loading washing machines gather more dust than front-load ones, especially around the dials. So, for a thorough cleaning, use the below tips:

1. Dip a microfibre cloth in white vinegar and use it to remove the dust or detergent residues in the detergent dispenser tray and around the dials.
2. Use a toothbrush for cleaning hard-to-reach areas around the lid and under the rim of the washtub. 

When should you clean your Washing Machine?

The ideal cleaning cycle of your washing machine depends on your usage. However, it is better to give your washing machine a thorough cleaning once or twice a month. Regular cleaning helps in keeping the machine functioning in good condition, and the subsequent washes are of optimum quality.

Washing Machines with Self-Clean Technology

While you can clean the drum manually and ensure 100% clean wash, you can purchase a machine equipped with Self Clean technology. The feature prevents dirt and bacteria accumulation inside the machine by using smart balls that are germ-free and anti-bacterial, ensuring a healthy and clean inner drum.

Washing machines with Self Clean technology are undoubtedly the future as they reduce the need for regular manual cleaning and maintenance of the machine. Thus, it will help save time and labour.

Washing machines can easily last for more than a decade if you take care of them. All it takes to experience the optimal performance of your washing machine is taking a little time to clean it regularly.