LG Dryer – Error Code d95

LG – Error Code d95

Is your LG tumble dryer showing up with Error Code d95 on the screen?

What is a LG Error Code d95?

LG Dryer – Error Code d95 indicates that the dryer’s exhaust is clogged 95%.

The hot, humid air from the dryer has to go somewhere, or else the moisture will stay in the drum and clothes. 2 or 4 four bars on the flowsense indicates that the exhaust system is severely restricted.

Recommended solution/fix steps

• Contact tumble dryer technician.
• Check for lint buildup at the rear exhaust duct, the lint build-up will cause a long time drying in the dryer.
• A crushed or damaged exhaust will also cause air blockage. If possible, check every section of your exhaust duct to ensure it is not crushed, kinked or damaged.
• Avoid long runs or runs with multiple elbows or bends. Excess or crushed transition duct. Too many elbows or exhaust too long can also cause a long time drying.
• When the ductwork is too long or has too many bends, blockages can occur and will be hard to trace. In this case, check the exterior part of the house when the machine is running to see if exhaust air is blowing outside. For proper inspection and repair of this situation, contact a local vent cleaning company to clean the vent.

Troubleshooting to try

• Check that the dryer is still plugged into the power socket
• Check for a dirty filter or blocked vent
• Check your dryer door is properly closed
• Check your tumble dryer circuit breakers
• Check your tumble dryer belt if the drum isn’t turning
• Check your dryer door switch
• Check that your dryer is level and not excessively shaking
• Check that all hoses are securely attached

How to restart/reset/reboot your LG tumble dryer?

You may find your LG laundry dryer needs resetting if it starts to malfunction or isn’t responding to any input via your control panel. Resetting your tumble dryer re-starts the internal computer and can often restore the unit to normal working order. The exact instructions will vary depending on your model of LG tumble dryer.

Typically, this procedure will be:

1. Unplug the dryer.
2. Press and hold the POWER/START button for 5 seconds.
3. Press and hold the PLAY/PAUSE button for 5 seconds.
4. Plug the dryer back in. The drum light and dryer should turn on.

LG Maintenance

In order for your LG dryer to perform at its best please follow these regular maintenance guidelines to ensure long life from your unit for years to come.

• It’s important to clean up the lint filter after every load. This can be done easily, by lifting out the filter and cleaning by hand or with a vacuum.
• If it needs to be cleaned thoroughly, water can be used. Make sure to dry the filter completely before re-inserting back into place.
• Get your dryer ducts cleaned annually to help maximize your dryer’s performance.
• Check for lint buildup on the moisture sensor located behind the lint filter and wipe often with a dry rag. Look for, and clean any lint build-up on the door gaskets.
• After utilizing your STEAM CYCLE feature on your LG dryer, you might notice some moisture buildup and condensation on the drum. Please dry the cavity thoroughly with a soft towel to prevent possible buildup. It is also recommended to put at least 3 articles of clothing in your dryer when using the STEAM CYCLE feature to effectively dry your garments.
• With proper care and regular maintenance, your LG dryer is built to last.