LG Dryer – Error Code tE1 indicates a problem was detected with the dryer’s thermistor.
LG Dryer – Error Code tE1
📚 Contents
LG – Error Code tE1
Is your LG tumble dryer showing up with Error Code tE1 on the screen?
What is a LG Error Code tE1?
LG Dryer – Error Code tE1 indicates a problem was detected with the dryer’s thermistor.
Recommended solution/fix steps
- Unplug the dryer, or trip the circuit breaker supplying power to the dryer.
- While the dryer remains without power, press and hold the START/PAUSE button for 5 seconds.
- Restore power to the dryer and attempt to run another cycle.
- Flea power is residual static electricity that remains within an electronic device or appliance’s Printed Circuit Board even after it has been powered off, often causing erratic behaviour from the device. Draining residual flea power, also known as performing a “hard reset”, is also a common troubleshooting step in eliminating erroneous error codes that might have popped up in the control panel display window.
- Run a reset of your dryer
- Contact tumble dryer technician.
Troubleshooting to try
- Check that the dryer is still plugged into the power socket
- Check for a dirty filter or blocked vent
- Check your dryer door is properly closed
- Check your tumble dryer circuit breakers
- Check your tumble dryer belt if the drum isn’t turning
- Check your dryer door switch
- Check that your dryer is level and not excessively shaking
- Check that all hoses are securely attached
How to restart/reset/reboot your LG tumble dryer?
You may find your LG laundry dryer needs resetting if it starts to malfunction or isn’t responding to any input via your control panel. Resetting your tumble dryer re-starts the internal computer and can often restore the unit to normal working order. The exact instructions will vary depending on your model of LG tumble dryer.
Typically, this procedure will be:
- Unplug the dryer.
- Press and hold the POWER/START button for 5 seconds.
- Press and hold the PLAY/PAUSE button for 5 seconds.
- Plug the dryer back in. The drum light and dryer should turn on.
LG Maintenance
In order for your LG dryer to perform at its best please follow these regular maintenance guidelines to ensure long life from your unit for years to come.
- It’s important to clean up the lint filter after every load. This can be done easily, by lifting out the filter and cleaning by hand or with a vacuum.
- If it needs to be cleaned thoroughly, water can be used. Make sure to dry the filter completely before re-inserting back into place.
- Get your dryer ducts cleaned annually to help maximize your dryer’s performance.
- Check for lint buildup on the moisture sensor located behind the lint filter and wipe often with a dry rag. Look for, and clean any lint build-up on the door gaskets.
- After utilizing your STEAM CYCLE feature on your LG dryer, you might notice some moisture buildup and condensation on the drum. Please dry the cavity thoroughly with a soft towel to prevent possible buildup. It is also recommended to put at least 3 articles of clothing in your dryer when using the STEAM CYCLE feature to effectively dry your garments.
- With proper care and regular maintenance, your LG dryer is built to last.
