Midea Hot Water – Error Code E8

Midea Hot Water System – Error Code E8

Is your Midea hot water system showing up with Error Code E8 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code E8 and whether you should keep using your Midea hot water system.

What is a Midea Error Code E8?

The Midea Hot Water System has an Error Code E8, which means that: The Midea Water Heater Error Code E8 means that there is an electric leakage problem. This happens when the current difference between the L and N wires is more than 14 milliamperes (mA), as detected by the PCB current induction circuit.

In simpler terms, the water heater has a safety mechanism that checks the electrical current flowing through it. If there is a significant difference in the current between the live (L) and neutral (N) wires, it indicates that there is an electric leakage. This could be due to a faulty component or a problem with the wiring. When this error code appears, it means that the water heater is not functioning properly and needs to be checked and repaired by a professional.

Recommended solution/fix steps

To fix the Midea Water Heater Error Code E8, follow these steps:

1. Turn off the water heater and unplug it from the power source.
2. Check the power cord and make sure it is not damaged or frayed.
3. Inspect the electrical connections and ensure they are secure and not loose.
4. Look for any signs of water leakage around the heater and fix any leaks if found.
5. If the above steps don’t resolve the issue, you may need to call a professional electrician or contact Midea customer support for further assistance.
6. Do not attempt to repair or open the water heater yourself if you are not experienced with electrical work

How to reset my Midea Hot Water System

To reset the Midea Water Heater with Error Code E8, follow these steps:

1. Turn off the power supply to the water heater by switching off the circuit breaker or unplugging it from the power source.
2. Wait for a few minutes to allow the appliance to cool down.
3. Check the current_induction_circuit on the PCB (printed circuit board) for any signs of damage or loose connections.
4. If everything looks fine, reconnect the circuit by securely attaching the wires to their respective terminals.
5. Turn on the power supply to the water heater by switching on the circuit breaker or plugging it back into the power source.
6. The water heater should now reset and the Error Code E8 should disappear.
7. If the error persists, it is recommended to contact a professional technician or the manufacturer for further assistance

Can I still use my Midea hot water system?

After seeing the fault code E8 on the Midea Water Heater, it indicates an electric leakage error. This error occurs when the current difference between L and N is greater than 14mA, as detected by the PCB current induction circuit. In such a case, it is not recommended to continue using the appliance. Electric leakage can pose a serious safety hazard, potentially leading to electric shocks or other accidents. It is crucial to address this issue promptly by contacting a professional technician or the manufacturer for assistance. Continuing to use the water heater in this condition may put the user at risk and could potentially damage the appliance further