Phocos – Error Code 13

Phocos Solar Inverter – Error Code 13

Is your Phocos solar inverter showing up with Error Code 13 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code 13 and whether you should keep using your Phocos solar inverter.

What is a Phocos Error Code 13?

The Phocos Solar Inverter has an Error Code 13, which means that: Error Code 13 on the Phocos Solar Inverter indicates a problem with the battery discharge over-current. This means that the amount of electric current flowing from the battery to the inverter is too high. It could be caused by a faulty battery or a problem with the inverter itself. When this error occurs, it is important to check the battery connections and make sure they are secure. It is also recommended to inspect the battery for any signs of damage or wear. If the issue persists, it may be necessary to contact a professional technician to diagnose and fix the problem.

Recommended solution/fix steps

To fix Phocos Solar Inverter Error Code 13, which indicates battery discharge over-current, follow these steps:

1. Turn off the inverter and disconnect it from the power source.
2. Check the battery connections for any loose or damaged wires.
3. Inspect the battery for any signs of damage or leakage.
4. If the battery seems fine, check the inverter’s settings and make sure it is properly configured for the battery type.
5. Reset the inverter by turning it off and on again.
6. If the error persists, try replacing the battery with a new one.
7. If none of these steps work, contact a professional technician or the manufacturer for further assistance

How to reset my Phocos Solar Inverter

To reset the Phocos Solar Inverter with Error Code 13 (indicating battery discharge over-current), follow these steps:

1. Turn off the inverter by pressing the power button or disconnecting it from the power source.
2. Check the battery connections and ensure they are secure.
3. Disconnect any loads connected to the inverter.
4. Wait for a few minutes to allow the inverter to cool down.
5. Reconnect the inverter to the power source.
6. Turn on the inverter and check if the error code has cleared.
7. If the error code persists, contact a professional technician or the manufacturer for further assistance.

Remember to always prioritize safety and consult the user manual for specific instructions related to your Phocos Solar Inverter model

Can I still use my Phocos solar inverter?

The Phocos Solar Inverter Error Code 13 indicates a battery discharge over-current. This fault code suggests that there is excessive current flowing from the battery, which can potentially damage the inverter or other connected devices. It is important to address this issue promptly to prevent further damage. Depending on the severity of the over-current, the appliance may still be usable, but it is recommended to consult the manufacturer’s manual or contact a professional technician for assistance. Continuing to use the appliance without resolving the over-current issue may lead to further complications or even permanent damage