Phocos – Error Code 2

Phocos Solar Inverter – Error Code 2

Is your Phocos solar inverter showing up with Error Code 2 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code 2 and whether you should keep using your Phocos solar inverter.

What is a Phocos Error Code 2?

The Phocos Solar Inverter has an Error Code 2, which means that: Error Code 2 on the Phocos Solar Inverter indicates that the inverter has detected an over-temperature issue. This means that the inverter has become too hot and needs to cool down to prevent any damage or malfunction. When the inverter gets too hot, it can affect its performance and efficiency, and in some cases, it may even shut down to protect itself from further damage. To resolve this error, it is important to check the surrounding environment of the inverter and ensure that there is proper ventilation and airflow. Additionally, it is recommended to keep the inverter away from direct sunlight or any other heat sources that may contribute to its overheating.

Recommended solution/fix steps

To fix Phocos Solar Inverter Error Code 2, which indicates an over-temperature issue, follow these steps:

1. Turn off the inverter and disconnect it from the power source.
2. Check the surrounding environment for any obstructions or objects that may be blocking airflow to the inverter.
3. Ensure that the inverter is placed in a well-ventilated area, away from direct sunlight or heat sources.
4. Clean any dust or debris from the inverter’s cooling vents using a soft brush or compressed air.
5. Allow the inverter to cool down for at least 30 minutes before turning it back on.
6. If the error persists, contact a professional technician or the manufacturer for further assistance

How to reset my Phocos Solar Inverter

To reset the Phocos Solar Inverter with Error Code 2 (Over-temperature), follow these steps:

1. Turn off the inverter by pressing the power button or disconnecting it from the power source.
2. Allow the inverter to cool down for at least 30 minutes.
3. Check the surroundings for any obstructions or sources of heat that may have caused the over-temperature issue.
4. Remove any obstacles and ensure proper ventilation around the inverter.
5. After the cooling period, reconnect the inverter to the power source.
6. Press the power button to turn it back on.
7. Monitor the inverter for any signs of overheating or error codes.
8. If the error code persists, contact a professional technician for further assistance

Can I still use my Phocos solar inverter?

After seeing error code 2, which indicates over-temperature, it is not recommended to continue using the Phocos Solar Inverter. Overheating can cause damage to the internal components and potentially lead to a malfunction or even a fire hazard. It is important to address the issue promptly by allowing the inverter to cool down and checking for any obstructions to airflow or ventilation. If the problem persists, it is advisable to contact a professional technician or the manufacturer for further assistance. Continuing to use the appliance in this state may result in further damage and pose a safety risk