Ravenheat Error Code E10: The Ravenheat Boiler’s Error Code E10 means that the water pressure in the boiler is too high. This can happen when there is a problem with the pressure relief valve or if the filling loop has been left open for too long. When the water pressure is too high, it can cause damage to the boiler and other parts of the heating system. It is important to address this issue as soon as possible to prevent any further damage and ensure the boiler is working efficiently.
Ravenheat Boiler – Error Code E10
📚 Contents
Ravenheat Boiler – Error Code E10
Is your Ravenheat boiler showing up with Error Code E10 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code E10 and whether you should keep using your Ravenheat boiler.
What is a Ravenheat Error Code E10?
The Ravenheat Boiler’s Error Code E10 means that the water pressure in the boiler is too high. This can happen when there is a problem with the pressure relief valve or if the filling loop has been left open for too long. When the water pressure is too high, it can cause damage to the boiler and other parts of the heating system. It is important to address this issue as soon as possible to prevent any further damage and ensure the boiler is working efficiently.
Recommended solution/fix steps
When you see the E10 error code on your Ravenheat Boiler, it means that the boiler water pressure is too high. To resolve this issue, you should start by checking the pressure gauge on the boiler. If the pressure is above the recommended range (usually between 1 and 1.5 bar), you will need to release some of the excess pressure. To do this, locate the pressure relief valve and slowly open it until the pressure drops to the desired level. Once the pressure is within the correct range, you can reset the boiler by turning it off and on again. If the error code persists or if you are unsure about any of the steps, it is recommended to contact a qualified heating engineer for further assistance.
Fault codes that are often associated with or mistaken for error code E10 are: E1O, E20, E5, E8, E6, E1, E15, E18, E12, E16
Can I still use my Ravenheat boiler?
If the Ravenheat Boiler displays an E10 error code, it means that the boiler water pressure is too high. This error code indicates that the machine cannot be operated until the water pressure is reduced to a safe level. Continuing to operate the boiler with high water pressure can cause damage to the system and potentially lead to a dangerous situation. Therefore, it is important to address the issue immediately by checking the pressure gauge and adjusting the pressure accordingly. Once the pressure is reduced to a safe level, the error code should disappear, and the boiler can be operated as normal. It is crucial to follow the manufacturer’s instructions and seek professional help if necessary to ensure the safe and efficient operation of the Ravenheat Boiler.
