Rinnai Error Code 7: The Rinnai Boiler’s Error Code 7 means that the boiler thinks that hot water has been used continuously for 8 hours, even if it hasn’t. To fix this error, you should first check the water flow sensor. Make sure it is in PULSE mode and check if the “water drop” indicator on the remote control is on while using hot water. Also, check if all the taps are closed and inspect the hoses and pipes for any water leakage. If you find a leak, fix it. Finally, restart the boiler using the control panel.
Rinnai Boiler – Error Code 7
📚 Contents
Rinnai Boiler – Error Code 7
Is your Rinnai boiler showing up with Error Code 7 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code 7 and whether you should keep using your Rinnai boiler.
What is a Rinnai Error Code 7?
The Rinnai Boiler’s Error Code 7 means that the boiler thinks that hot water has been used continuously for 8 hours, even if it hasn’t. To fix this error, you should first check the water flow sensor. Make sure it is in PULSE mode and check if the “water drop” indicator on the remote control is on while using hot water. Also, check if all the taps are closed and inspect the hoses and pipes for any water leakage. If you find a leak, fix it. Finally, restart the boiler using the control panel.
Recommended solution/fix steps
If you see Error Code 7 on your Rinnai Boiler, it means that the boiler thinks hot water has been continuously used for 8 hours. The first step is to pay attention to the water flow sensor and check if there is no PULSE mode. Also, check if the “water drop” indicator on the remote control is on while using hot water. Make sure to check if the taps are closed and inspect hoses and pipes for water leakage. If there is a leak, eliminate it. Finally, restart the boiler via the control panel. If the problem persists, contact a professional technician for further assistance.
Fault codes that are often associated with or mistaken for error code 7 are: S
Can I still use my Rinnai boiler?
After seeing Error Code 7 on the Rinnai Boiler, the machine can still be operated. However, certain steps need to be taken to resolve the issue. Firstly, one should check the water flow sensor and ensure that it is in PULSE mode. Additionally, the “water drop” indicator on the remote control should be off while using hot water. It is also important to check if all taps are closed and inspect hoses and pipes for any water leakage. If a leak is found, it should be eliminated. Finally, the boiler can be restarted through the control panel. By following these steps, the machine should be able to operate normally again.
