SolarMax – Error Code The display remains blank

SolarMax Solar Inverter – Error Code The display remains blank

Is your SolarMax solar inverter showing up with Error Code The display remains blank on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code The display remains blank and whether you should keep using your SolarMax solar inverter.

What is a SolarMax Error Code The display remains blank?

The SolarMax Solar Inverter has an Error Code The display remains blank, which means that: The SolarMax Solar Inverter Error Code indicates that there is an internal failure in the inverter. This means that there is a problem within the inverter itself, which is preventing it from functioning properly. When this error code is displayed, the inverter’s screen will remain blank, showing no information or data. This can be a frustrating issue as it prevents the inverter from generating solar power and supplying it to the connected devices or the electrical grid. To resolve this error, it is recommended to contact a professional technician or the manufacturer for assistance in diagnosing and repairing the internal failure.

Recommended solution/fix steps

To fix the SolarMax Solar Inverter error code where the display remains blank due to internal failure, follow these steps:

1. Turn off the inverter by switching off the main power supply.
2. Wait for a few minutes to allow the inverter to cool down.
3. Check the connections between the inverter and the solar panels, ensuring they are secure and undamaged.
4. Inspect the DC input and AC output cables for any signs of damage or loose connections.
5. If everything appears fine, reset the inverter by pressing the reset button or following the manufacturer’s instructions.
6. Turn on the main power supply and check if the display is now functioning.
7. If the error persists, consult the user manual or contact the manufacturer’s customer support for further assistance

How to reset my SolarMax Solar Inverter

To reset the SolarMax Solar Inverter when the display remains blank due to internal failure, follow these steps:

1. Locate the main power switch or circuit breaker for the inverter and turn it off.
2. Wait for about 30 seconds to ensure that all power is completely drained from the inverter.
3. Turn the main power switch or circuit breaker back on.
4. Check if the display is now functioning properly. If not, proceed to the next step.
5. Locate the reset button on the inverter, usually labeled as “Reset” or with a small circular arrow symbol.
6. Press and hold the reset button for about 10 seconds.
7. Release the reset button and wait for the inverter to restart.
8. Check if the display is now working. If not, contact a professional technician for further assistance

Can I still use my SolarMax solar inverter?

No, this appliance cannot be used if the display remains blank and shows an internal failure error code. The blank display indicates that there is an internal issue with the SolarMax Solar Inverter, which prevents it from functioning properly. It is important to address this error code and have the inverter repaired or replaced by a professional technician. Continuing to use the appliance in this state may lead to further damage or inefficiency in the solar power system