Takagi Error Code 2: The Takagi Hot Water System’s Error Code 2 indicates a problem with either the Inlet Thermistor, Output Thermistor, or the Air-fuel ratio rod. These components are responsible for measuring and regulating the temperature and fuel mixture in the system. When any of these parts fail, it can result in issues with the hot water system’s performance. This error code serves as a warning to the user that there is a malfunction in one of these critical components, and it needs to be addressed to ensure proper functioning of the system. It is recommended to contact a professional technician to diagnose and fix the specific issue causing the Error Code 2
Takagi Hot Water – Error Code 2
📚 Contents
Takagi Hot Water System – Error Code 2
Is your Takagi hot water system showing up with Error Code 2 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code 2 and whether you should keep using your Takagi hot water system.
What is a Takagi Error Code 2?
The Takagi Hot Water System’s Error Code 2 indicates a problem with either the Inlet Thermistor, Output Thermistor, or the Air-fuel ratio rod. These components are responsible for measuring and regulating the temperature and fuel mixture in the system. When any of these parts fail, it can result in issues with the hot water system’s performance. This error code serves as a warning to the user that there is a malfunction in one of these critical components, and it needs to be addressed to ensure proper functioning of the system. It is recommended to contact a professional technician to diagnose and fix the specific issue causing the Error Code 2
Recommended solution/fix steps
When you encounter Error Code 2 on your Takagi Hot Water System, it indicates a problem with the Inlet Thermistor, Output Thermistor, or Air-fuel ratio rod failure. To resolve this issue, follow these steps:
1. Turn off the power supply to the system.
2. Check the wiring connections for any loose or damaged wires.
3. Inspect the Inlet Thermistor and Output Thermistor for any signs of damage or corrosion.
4. Clean the thermistors using a soft cloth or brush to remove any dirt or debris.
5. If the thermistors are damaged, replace them with new ones compatible with your Takagi system.
6. Inspect the air-fuel ratio rod for any signs of damage or misalignment.
7. If the rod is damaged or misaligned, contact a professional technician for further assistance.
8. Once all necessary repairs or replacements are made, turn on the power supply and test the system for proper functioning.
If the error persists
Fault codes that are often associated with or mistaken for error code 2 are: z
Can I still use my Takagi hot water system?
After encountering Error Code 2 on the Takagi Hot Water System, the machine may still be operable depending on the severity of the issue. Error Code 2 indicates a problem with the Inlet Thermistor, Output Thermistor, or Air-fuel ratio rod failure. If the failure is minor, the machine might still function, but it is recommended to address the issue promptly to avoid further damage. However, if the failure is significant, it is advisable to refrain from operating the machine until the problem is resolved. It is crucial to consult the manufacturer’s manual or contact a professional technician to diagnose and fix the specific problem causing Error Code 2
