Toshiba – Error Code F15

Toshiba Error Code F15 indicates a problem with the temperature sensors (TE and TS) or an Internal Power Drive Unit (IPDU) error.

Toshiba – Error Code F15

Is your Toshiba air conditioner showing up with Error Code F15 on the screen?

What is a Toshiba Error Code F15?

The Error Code F15 on your Toshiba air conditioner indicates a problem with the temperature sensors (TE and TS) or an Internal Power Drive Unit (IPDU) error. Essentially, the air conditioner is having trouble detecting the correct temperature due to a malfunction in its temperature sensors or an issue with its internal power system. This can prevent the air conditioner from operating efficiently or at all.

Recommended solution/fix steps

To fix this issue, try the following steps in simple language:

  1. Power Off: Start by turning off your air conditioner completely. This can be done either using the remote control or by switching off the power at the circuit breaker.
  2. Check Connections: Once the unit is off, check if all the electrical connections to the air conditioner are secure and undamaged. Look for any loose wires or signs of wear.
  3. Reset: After ensuring all connections are secure, reset your air conditioner by turning the power back on. Sometimes, a simple reset can clear the error.
  4. Inspect Sensors: If the error persists, the temperature sensors may need to be inspected. If you’re comfortable, you can locate these sensors (usually near the evaporator coil) and check for any visible issues, but it’s best to call a professional if you’re unsure.
  5. Call for Service: If the above steps do not resolve the issue, it’s likely time to call a professional technician. They can diagnose whether the problem lies with the sensors or the IPDU and make the necessary repairs.

Remember, if you’re not confident in checking the components yourself, it’s always safer to contact a professional technician to avoid any potential damage or further issues.

Troubleshooting to try

  • Check for a dirty air filter
  • Check your thermostat settings
  • Check your air conditioner circuit breakers
  • Check your outdoor unit
  • Check all air vents

How to restart/reset/reboot your Toshiba air conditioner?

You may find your Toshiba air conditioning unit needs resetting if it starts to malfunction or isn’t responding to any input via your control panel or remote control. Resetting your air conditioner re-starts the internal computer and can often restore the unit to normal working order. The exact instructions will vary depending on your model of Toshiba air conditioner.

Typically, this procedure will be:

  1. Turn off the air conditioning unit on your thermostat
  2. Turn the breaker off to the outside unit
  3. Wait 30 seconds
  4. Turn the breaker on
  5. Turn your air conditioning on using the thermostat

Toshiba Maintenance

Cleaning your air conditioner shouldn’t take longer than a few minutes every fortnight. To start, simply check the instructions in your manual. If you have a new Toshiba Air single split system product, feel free to use the instructions below for the best way to clean your air conditioner.

Indoor filters

This is the most important part of cleaning your AC unit and should happen every two weeks for the life of your unit (or more if your space is particularly dusty).

To clean your filters simply follow these four steps:

  1. Open the air inlet grille.
  2. Remove the air filter.
  3. Vacuum or wash with clean fresh water and then dry the filters.
  4. Reinstall the air filters and close the air inlet grille.

Doing this regularly helps make sure that your filters are working at their optimum level to provide you with cleaner, healthier air in your home.

Use self-cleaning mode (if available)

All new Toshiba single split system air conditioners come with a self-cleaning mode that helps prevent the build-up of bad odours and humidity inside the unit. To turn the self-cleaning mode on, follow these steps:

  1. Press the on/off button on your air conditioner’s remote once when your air conditioner is in cool or dry mode. The fan will continue to run for another 30 minutes then turn off automatically.
  2. To stop the unit immediately, press the more 2 times within 30 seconds.

Run the self-cleaning function every fortnight for best results.

Clean indoor unit

Dust may build up on the exterior of your air conditioner, including on the sides of its louvres. To remove this, don’t use spray and wipes or other chemicals – simply wipe it off with a damp cloth whenever you notice dust building up.

Clean exterior unit

Your outdoor unit needs to be unobstructed so that air can flow in and out of it freely. Check your unit regularly and remove any rocks, leaves or other debris that might have built up around it. You may need to do this more regularly during autumn if there are trees near your outdoor unit.

Cleaning your air conditioner may not be top of your list of to-dos, but if you spend a few minutes doing it every fortnight, you could save hundreds of dollars, improve the air quality in your home and reduce your power bill and improve the functioning of your unit.

Category: Tag: