Toshiba Washer – Error Code E4

Toshiba Washer – Error Code E4

Is your Toshiba washer showing up with Error Code E4 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code E4 and whether you should keep using your Toshiba washer.

What is a Toshiba Error Code E4?

The Toshiba Washer has an Error Code E4, which means that: The Toshiba washer error code E4 means that there is a problem with the float switch. The float switch is a small device that helps control the water level in the washer. It can malfunction or close improperly, causing this error code to appear. This issue can prevent the washer from filling or draining properly, leading to problems with the washing cycle. To fix this error, you may need to check the float switch and ensure it is functioning correctly. If it is broken or closed improperly, it may need to be repaired or replaced.

Recommended solution/fix steps

To fix the Toshiba Washer Error Code E4, follow these steps:

1. Turn off the washer and unplug it from the power source.
2. Open the washer door and remove any clothes or items inside.
3. Locate the float switch, which is usually located near the bottom of the washer.
4. Check if the float switch is stuck or not moving freely.
5. Gently move the float switch up and down to ensure it is not stuck.
6. If the float switch is damaged or broken, it may need to be replaced.
7. Contact a professional technician or Toshiba customer support for further assistance if needed.
8. Once the issue is resolved, plug the washer back in and restart it to see if the error code is gone

How to reset my Toshiba Washer

To reset the Toshiba washer with error code E4, follow these steps. First, unplug the appliance from the power source. Next, locate the float switch, which is usually located near the bottom of the washer. Check if it is stuck or not moving freely. If it is stuck, gently move it up and down to ensure it is functioning properly. Then, plug the washer back into the power source. Finally, run a test cycle to see if the error code E4 has been resolved. If the error persists, it may indicate a more serious issue, and it is recommended to contact a professional technician for further assistance

Can I still use my Toshiba washer?

If you are seeing the Toshiba washer error code E4, it means that the float switch is malfunctioned or closed improperly. This fault code indicates that the washer is unable to detect the water level in the tub, which can lead to overfilling or underfilling. If this issue is not resolved, it can cause damage to the washer and potentially flood your laundry room. Therefore, it is not recommended to continue using the appliance until the float switch is repaired or replaced. It is best to contact a professional technician to diagnose and fix the issue to ensure the safe and proper functioning of your Toshiba washer