Viessmann Boiler – Error Code FE2
Is your Viessmann boiler showing up with Error Code FE2 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code FE2 and whether you should keep using your Viessmann boiler.
What is a Viessmann Error Code FE2?
The Viessmann Boiler’s FE2 error code means that the burner is experiencing an error and is in emergency operation mode. This means that there is a problem with the fan, which is not at a complete standstill. It could also indicate a plug-in connection error.
In simpler terms, the boiler’s burner is not working properly and is in a special mode to prevent any further issues. The fan, which helps with the boiler’s operation, is not completely stopped or there might be a problem with the connection. This error code is a signal that something needs to be fixed or checked to ensure the boiler functions correctly.
Recommended solution/fix steps
If you encounter the FE2 error code on your Viessmann Boiler, it indicates that the burner is in error mode emergency operation due to a fan not being at standstill or a plug-in connection error. To resolve this issue, follow these steps:
1. Check the fan: Ensure that the fan is not obstructed and can rotate freely. If there is any debris or blockage, clean it carefully.
2. Inspect the plug-in connection: Verify that all connections related to the fan are secure and properly plugged in. If any loose or damaged connections are found, fix or replace them.
3. Reset the boiler: Turn off the power to the boiler for a few minutes, then turn it back on. This reset may clear the error code and restore normal operation.
4. Contact a professional: If the error persists after performing the above steps, it is recommended to contact a qualified technician or the manufacturer’s customer support for further assistance. They will be able to diagnose the issue accurately.
Related Fault Codes
Fault codes that are often associated with or mistaken for error code FE2 are: F02, F82, F62, F52, F32, F72, F12, F92, F22, F42
Can I still use my Viessmann boiler?
After encountering the FE2 error code on a Viessmann Boiler, it indicates that the burner is in error mode emergency operation due to either the fan not being at standstill or a plug-in connection error. In this situation, it is not recommended to continue operating the machine. The error code suggests a critical issue that needs to be addressed promptly. Continuing to use the boiler under these circumstances may lead to further damage or potential safety hazards. It is advisable to consult a professional technician or contact the manufacturer’s customer support to diagnose and resolve the problem before attempting to operate the machine again.
