Voltronic Power – Error Code 3

Voltronic Power Solar Inverter – Error Code 3

Is your Voltronic Power solar inverter showing up with Error Code 3 on the screen? In this article, we’ll look at why it is happening, some potential next steps for fixing error code 3 and whether you should keep using your Voltronic Power solar inverter.

What is a Voltronic Power Error Code 3?

The Voltronic Power Solar Inverter has an Error Code 3, which means that: Error Code 3 on the Voltronic Power Solar Inverter means that the battery voltage is too high. This happens when the battery is charged up too much and the voltage exceeds the safe limit. When the battery voltage is too high, it can cause damage to the inverter and other connected devices. This error code is a safety feature that protects the system from potential harm. To fix this issue, you will need to reduce the battery charge by using some of the stored energy or by disconnecting the solar panels from the inverter temporarily. It is important to address this error promptly to prevent any damage to the inverter and ensure the system operates safely and efficiently.

Recommended solution/fix steps

To fix the Voltronic Power Solar Inverter Error Code 3, follow these steps:

1. Check the battery voltage using a multimeter or voltmeter.
2. If the voltage is indeed too high, disconnect the solar panels from the inverter to prevent further charging.
3. Allow the battery to discharge naturally or use a load to drain the excess charge.
4. Once the voltage is within the acceptable range, reconnect the solar panels to the inverter.
5. Restart the inverter and check if the error code has cleared.
6. If the error persists, consult the user manual or contact the manufacturer’s customer support for further assistance

How to reset my Voltronic Power Solar Inverter

To reset the Voltronic Power Solar Inverter with Error Code 3 indicating high battery voltage, follow these steps:

1. Turn off the inverter by pressing the power button or flipping the switch.
2. Locate the DC disconnect switch or breaker near the inverter and turn it off.
3. Wait for about 5 minutes to allow the inverter to fully power down.
4. After the waiting period, turn on the DC disconnect switch or breaker.
5. Turn on the inverter by pressing the power button or flipping the switch.
6. Monitor the inverter for any changes in the error code display.
7. If the error code persists, consult the user manual or contact the manufacturer’s customer support for further assistance

Can I still use my Voltronic Power solar inverter?

After seeing error code 3 on the Voltronic Power Solar Inverter, which indicates that the battery voltage is too high, it is not recommended to continue using the appliance. This fault code suggests that there is an issue with the battery voltage, which could potentially lead to damage or malfunction of the inverter. It is important to address this issue promptly to avoid any further complications or potential hazards. It is advisable to consult the manufacturer’s manual or contact a professional technician to diagnose and resolve the problem before using the appliance again